AgNi Bimetal Contact Rivets
Product Description
Product Detail
AgNi Bimetal Contact Rivets
Contact rivet factory, more than 10 years manufacture experience, attained ISO9001, work on OEM and ODM projects.
1. Introduction of AgNi Bimetal Contact Rivets
AgNi bimetal contact rivets has a high level of electrical and thermal conductivity, good plasticity and arc corrosion resistance, as well as a very low contact resistance.
2. Application of AgNi Bimetal Contact Rivets
Mainly usedin all kinds of switch, controller, voltage regulator, circuit breaker, automotive electrical, magnetic starter, and so on.
Normally suit for the electric current which below 100A, AgNi10 is commonly used to the AC contactor below 20A, AgNi (15 ~ 40) are able to bear a larger electric load.
3. Main Materials for AgNi Bimetal Contact Rivets
AgNi10/Cu, AgNi12/Cu, AgNi15/Cu, AgNi20/Cu, AgNi30/Cu
|
Category |
Density g/cm3≥ |
Electrical conductivity .cm≤ |
Hardness soft HV≥ |
Tensile strength soft MPa≥ |
|
AgNi10 |
10～10.32 |
2.10 |
75 |
310 |
|
AgNi12 |
10～10.32 |
2.1 |
75 |
|
|
AgNi15 |
9.9～10.23 |
2.2 |
76 |
320 |
|
AgNi20 |
9.8～10.15 |
2.3 |
77 |
320 |
|
AgNi30 |
9.7～9.97 |
2.7 |
80 |
|
For a less than 20 amp circuit load, rivets are often made fromAgNi10.
4.Specification of AgNi Bimetal Contact Rivets
Dimensions can be customized
5. Product types for AgNi Bimetal Contact Rivets
a. Single metal AgNi
b. Bimetal AgNi + Cu
c. Tri-metal AgNi –copper –AgNi
6. Process of AgNi Bimetal Contact Rivets
7. Manufacture plant of AgNi Bimetal Contact Rivets
8. Quality certificate for AgNi Bimetal Contact Rivets
9. Packing and shipping for AgNi Bimetal Contact Rivets
Packing:
First put 500-5000 pcs into small plastic bags or vacuum plastic bags, then in separated small carton box, at last Into hard cardboard box.
Shipping:
We
will choose the best way according to customer’s requests.
1.
By Air, to the indicated airport.
2. By Express (FedEx, UPS, DHL, TNT,EMS), to the indicated address.
2.By Sea, to the indicated sea port.
10.FAQ
1. Do you have ISO certificate?
Yes, we obtained ISO9001
2. How long is your delivery time?
15-25 days depend on the raw material condition
3. Do you make parts according to our design?
Yes, we always do as per customers drawings or Technical documents
4. Can you help us to choose suitable material?
Yes, we can recommend the most suitable material according to your application.
5. Do you provide sample? Free or charge?
Yes, if the sample in stock available, free of charge, if not, need to charge some mfg cost.